Arris-FM6BEPJ-K06A6A1N Flex Max601e Bridger Amplifier Module

FM6BEPJ-K06A6A1N- Flex Max601e 1Ghz Bridger Amplifier, module only.  24 db cable loss/17db tilt, 43 db spacing, 42/54 Mhz split, 427.25 Mhz ALC level control, 18 db active return gain, 2 active outputs with internal test points,2.5 amp, 90 volt powering with crowbar, no housing.  Uses the NPB  forward and return attenuators, SEQ-862 or SEQ-1G forward equalizers, SCS-862 or SCS-1G cable simulator and the MEQ-42 return equalizer.

FEATURES

• Offers a forward operational gain of 36 dB (manual)/33 dB (thermal and ALSC @ 711MHz QAM) and an operational return gain of 18 dB
• Pilot frequency available at 711.00 MHz (QAM)
• Directional coupler forward input and output testpoints. Directional coupler return output testpoint and resistive return input testpoint.
• Uses common legacy style equalizers and attenuators with guide pins
  1 GHz GaAs technology
• Designed to drop into existing 9-NH Series style housings to effectively upgrade a network from 750 or 870 MHz to 1 GHz bandwidth
• Plug-in diplex filters
• Built-in surge protection

The Flex Max 601 1 GHz Line Extender is the latest edition to the extensive 1 GHz RF Amplifier and Node offerings. The FM601 was designed using the legacy 9-NH Series housing as its base and can easily be deployed as either a new build/system extension amplifier or used as a drop-in module upgrade to existing Legacy 9-NH series housings. Offering the latest in 1 GHz technology, these amplifiers also accept legacy style 750/870 MHz EQs and Pads so you can efficiently extend or upgrade your network of GNA or G3A line extender amplifiers using common style plug-ins. The Flex Max 601 Line Extender amplifiers provide one high level RF distribution output.

Other configurations are available.

Spec Sheet

FM601e-B Ordering Information