|
|
Headend Electronics & Transport Equipment
|
|
 |
|
 |
The MU series antennas may be obtained as
single bays, MU12-1, stacks or quad mounted models. They are tuned
to cover any desired UHF TV Channel. Wide element spacing is used
to produce a sharp directivity "pick-up" pattern, which in turn produces
clean, ghost-free picture quality. The MU-Series antenna arrays
use HEAVY DUTY construction throughout to insure long lasting duty at
site where weather conditions require mechanical durability. |
 |
The SITCO MU- Series, MU48-4 UHF Quad
Arrays are manufactured an designed for the systems that require high
gain, high signal-to-noise ratio, high front-to-back ratio and sharp
forward signal "pick-up". These arrays are ideally suited for the
installations that not only require excellent signal "pick-up" but also
reliable durable construction for a long lasting installation. |
|
 |
CA series antenna arrays are designed
for the cable system 'head-end' sites. They are specifically tuned
and cut to the individual channel. With high gain and sharp
forward patter these arrays will insure excellent picture quality, due
to the reduction in mulitpath signal pick-up. |
 |
Sitco's CA series multi-bay quad
mounted antenna arrays are the ultimate in high performance and
durability for the CATV system 'head-ends'. These are designed for
high gain, high front to back ratio, extremely sharp forward 'pick-up'
lobe and large aperture to weak signals. |
|
 |
ECL series log periodic dipole arrays are
designed for medium gain, broadband receiving applications. The
ECL series is designed for applications requiring the extra gain.
It has been carefully designed to provide maximum gain flatness over any
given channel with in the antenna's pass band. |
 |
EML series log periodic dipole arrays are
designed for medium gain, broadband receiving applications. It has been
carefully designed to provide maximum gain flatness over any given
channel with in the antenna's pass band. |
|
 |
PA24-series preamplifiers are designed
for critical professional applications high gain, low noise, high output
level, narrow bandwidth with flat response, tight RF shielding and
rugged mechanical design for high reliability. The preamps are
housed in a heavy weatherproof die-cast aluminum housings equipped with
hardware for mast mounting. |
 |
PS24 power supply is designed to provide
power for a single Sitco/Triax PA24 series low noise preamplifier.
It features; line fusing, transient voltage spike protection, LED output
indicator, fused output and RF/DC diplex network to power the preamp via
the coaxial down lead. |
|
Not all products are shown
Contact DFC for additional products and pricing (click
here)
back to line card intro
back to home
|
