|
 |
8846-SD
- Sonde Locator-The single
frequency locator is designed to locate pipe cameras, and non metallic
conduits using Sondes. It is a one-piece design, lightweight and
accurate. Pick up tracer signals are at waist height, eliminating the
"duck walk". Large and easy to read display. 512 Hz frequency. Complete
with Receiver, Sonde, male to female push-rod adaptors, manual and
carrying case. |
 |
8856 - Path Finder II-Dual frequency 1w
locator can easily locate any metallic service line and the innovative
one-piece receiver design is lightweight and accurate. Easily picks up
tracer signals at waist height. Either a peak or null response. Analog
meter displays visual signal indication and a variable pitch tone gives
the user an audio indication of the signal response. Comes complete with
a 1 watt dual stage transmitter, receiver, red/black test leads, ground
rod. locating basics video, manual and carrying case |
|
 |
8869 - RF Cable, Pipe, Line and Fault
Locator-Offers three active frequencies (815 Hz, 8kHz, and 82 kHz).
Multiple active frequencies allow the user to accurately locate with a
minimum of "ghosting" to adjacent lines. 2 passive frequencies locate
live utilities without the use of a transmitter. Powerful 1 watt tracing
signal is reliable for direct connection, transmitter and coupled
induction. Backlit digital display for low-light reading. Complete with
1 watt transmitter, digital receiver, red/black test leads, ground rod,
batteries, manual, locating basics video and carrying cases. |
 |
8872 - Sonde and Utility Locator-Offers
two active frequencies, ensuring the ability to track any manufacturer's
camera or Sonde system. Will trace through conduit up to 20 feet in the
air or 10 feet in cast iron. Backlit digital display for low-light
reading and push button depth accurate up to 15 feet. Weather proof
membrane buttons. Complete with multifunction digital receiver, sonde
with female insert, male to female push-rod adaptors and carrying case. |
|
 |
8879 - Cable, Pipe, Line and Fault
Locator. Three active frequencies allow accurate tracing in congested
areas or the length of a single line. Active frequencies also give the
ability to continue locating past faults and around conduit bends. Two
passive frequencies allow locates of live utilities without the use of a
transmitter. Powerful 2.6 watt tracing signal is reliable for direct
connection, transmitter and coupled induction. Complete with
transmitter, digital receiver, ground rod, red/black test leads, AC and
DC battery charger, locating basics training video, manual and carrying
cases. |
 |
Sondes - Self-contained Signal
Transmitters-Used to trace the path of non-metallic pipes and locate
line blockages in clay, cast iron and other non conductive structures.
Threaded end caps for attaching to push rods. Rugged design with potted
components in an impact resistant compound. rounded heads and tails to
prevent hang-ups and operation for over 8 hours on one AA battery. Each
Sonde Kit includes 3/8" x 16 unc and 5/16" c 18 unc Push Rod Adaptors. |
