|
|
Tools & Test Equipment
|
|
 |
|
 |
CAT-AS: All Series Compression Assembly
Tool has two sets of jaws one for 59 & 6 connectors and one for 7 & 11
connectors that allows assembly of series 59/6, 7 and 11 drop connectors
in one tool.
More Features |
 |
CAT-Universal compression tool is capable
of crimping the RG 59 and RG 6 connectors from various manufacturers.
More Features |
|
 |
The Universal Drop Trimmer, UDT, is a one
step cable prep tool that removes the jacket and exposes the center
conductor. By changing blade cartridges that can be stored in the
handle, this tool is capable of preparing all 59, 6, 7, 11, Standard,
Tri, and Quad shield drop cables. (Note: this tool is not intended
for use with plenum rated cables).
More Features |
 |
SDT or Single Drop Trimmer comes in
various models specific to the size of cable you are working with.
The SDT596-250 is for 59 and 6 series cable and the SDT11-250 works with
11 series. They come with easy to replace blade cartridges part
#'s RC596-250 for RG 59 & 6, RC11-250 for RG 11 and RC11Q-250 for RG 11
quad shield.
More Features |
|
 |
The CR series Hex Crimp Tools come in a
variety of styles for CATV, MATV and STV type cable connectors.
This rugged crimper is made to last a long time and deliver precise
crimping of connectors.
More Features
Sizing |
 |
The Round Taper Tool (RTT) is designed to
be used with the 360 degree radial compression connectors. The
Unique spring loaded split jaw design allows fast & easy insertion,
compression and removal of the cable assembly. |
|
 |
The TW series torque wrenches are with
their factory preset torque setting are designed to prevent damage to
equipment from over or under tightening. They come with a tap port
rethreader on the opposite end of the tool body and are available in a
range of straight head sizes.
More Features |
 |
The TW-AH/IT model torque wrenches with
their factory preset torque setting allow for proper connectorization at
"F" connector interface. The angle head design and audible
'clicking' sound to indicate proper calibrated torque make this an easy
tool to use. |
|
 |
The TST 716 trap tool combines a trap
wrench with a security wrench. It works on all standard traps and
7/16" hex F connectors. It fits all sizes and types of metal
security sleeves. |
 |
The TT 716 trap tool is made of a
lightweight steel and black polymer construction. It fits all
standard traps and 7/16" hex F connectors. |
|
 |
The LTT-4 and LTT-7 locking terminator
tools come in 2 lengths. They are used on the following
terminators: GTP, TPG, PTP-59, PTP-59L, PTP-59PB, LFT, PST, SV-LT,
SV-LTA and TR 75 GLT. |
 |
The LTT-7/V2 and LTT-7/T-P locking
terminator tools combine the features of two tools in one versatile
tool. The LTT-7/V2 has the Viewsonics 2-prong terminating tool on
the opposite end of the LTT. The LTT-7/T-P has the PPC-502 and T&B
CLF/TRLF terminating tool on its opposite end.
More Features |
|
 |
The S-200 Security Shield Tool is for use
with 7/16" hex shielded "F" Connectors. The extended 7/16: shank
allows the tool to be used with the TW Torque Wrenches in security
shield applications. |
 |
IT59,6,11 is a "F" connector insertion
tool that makes putting "F" on cable fast and easy even in cold
temperatures. The flaring tool on the end expands the cable for
easier insertion of "F" connectors.
More Features |
|
 |
CST: Coring & Stripping Tools combine the
two jobs in one precise action. The tool can be used manually with the
"T" handler or attached to a drill. The CST is made to work on any
size trunk or distribution cable.
More Features |
 |
The QRT tool kits are designed
specifically for Commscope Quantum Reach (QR) cables. The kits
include a coring and stripping tool and a jacket stripping tool.
More Features |
|
 |
JST: Jacket Stripping Tools allow for
fast and efficient removal of jackets from trunk and distribution
coaxial cable including oversized jackets and flooded cables. The
preset blade assures there is no scoring or nicking of the aluminum
sheath. The replacement blade part # is CB 6667H.
More Features |
 |
The CC-100 center conductor cleaner comes
with clear, Plexiglas V-shaped cleaning notches in the blades. It
removes residual dielectric from the conductor of all sizes of trunk and
distribution cables without scratching or nicking. Replacement
blade part # is 16725. |
|
 |
The CC-200 does the same job as the
CC-100 above. It comes with clear Plexiglas, flat blades.
The replacement blade part # is 16722 |
 |
CT2-AS
compression assembly tool assembles 59,6,7 & 11 F compression type
connectors. It can be used with various brands including;
Corning Gilbert, PPC RCA Connectors, PCT, Arris, Digicon. It
has a spring loaded handle with push buttonn handle lock to keep the
tool compact and pouch friendly. Its compact ergonomic design
uses lower hand force when the tool is in compression mode.
More Features
Sizing |
|
 |
RT-BNC
Removal Tool Provides easy access to connectors in high-density
locations such as cable racks. Its head is formed specifically
for BNC connectors. |
 |
RT-F716
Removal Tool provides easy access to connectors in high-density
locations such as cable racks. It has a 7/16" head for F
connectors |
|
Not all products are shown
Contact DFC for additional products and pricing (click
here)
back to line card intro
back to home
|
