|
|
Headend Electronics & Transport Equipment
|
|
 |
|
 |
PCM55 - 216MHz Single Channel Crystal
Controlled A/V Modulator. Cost effective professional grade. Designed to
provide adjacent channel compatibility and FCC Docket 21006 for
frequency accuracy. Full 55dBmV output from sub-band channels T8 through
T11, CATV channels 2 to 22 including channels 95-99 while accommodating
HRC and IRC offset frequencies (11.75-216MHz).
Manual |
 |
PCFM - Agile FM Stereo Audio Modulator.
Frequency agile professional rebroadcast grade, microprocessor
controlled Stereo/Mono Audio Modulator. Provides up to 35dBmV output
across the FM band (88-108MHz. The unit is easily tuned by using channel
up/down buttons and the digital display is located on the front panel.
Designed specifically for commercial installations the Switchable mono/stereo
capability.
Manual |
|
 |
PCM55SAW-550 MHz Channelized-Agile PLL SAW-Filtered A/V Modulator.
Cost effective professional grade.
Manual |
 |
PHC series 1ghz passive combiners-The
PHC12G and PHC24G are professional re-broadcast grade rack mounted, high
isolation, passive headend signal combiners available in 12 and 24
channel configurations.
Manual |
|
 |
PFAD900CS 806mhz agile CATV demodulator-
is a frequency agile professional re-broadcast grade, microprocessor
controlled CATV demodulator. the unit accepts any NTSC television
signal in the 54-806mhz frequency range converting it to baseband video
and audio, while maintaining over 60db S/N ratio.
Manual |
 |
HBS-Single Channel Strip
Amplifier - High Band
Manual |
|
 |
LBS-Single Channel Strip
Amplifier - Low Band.
Manual |
 |
CA30RK1000-1 GHz
Broadband Push-Pull Headend Amplifier (30 dB gain)
Manual |
|
 |
BPF-408 MHz
Single-Channel Bandpass Filter.
Manual
|
 |
CEF-750-750 MHz
Single-Channel Elimination Filter
Manual |
|
 |
CEF-806-860 Mhz Single
Channel Elimination Filter.
Manual |
 |
TSMS-2150X-16AUV-16 Port
Rack-Mounted Satellite Multi-switch.
Manual |
|
 |
TSMS-2150X-8AUV-8 Port Rack-Mounted Satellite Multi-switch.
Manual
|
 |
TSMS-5/8RK-8
Output Rack-Mounted HDTV Satellite Multiswitch.
Manual |
|
 |
OR-71 19"headend equipment rack is built
of heavy duty steel, providing maximum physical stability to mounted
equipment while accommodating EIA standard RS310C 19" rack spacing.
Manual
|
 |
MOR-71-4-KIT can be added to the OR-71 to
make an even more sturdy and professional looking four post equipment
rack. |
|
Not all products are shown
Contact DFC for additional products and pricing (click
here)
back to line card intro
back to home
|
