Drop & Wiring Supplies

F-81NW - F splice Female-to Female adapter with mounting hardware. Suitable for wall-plate mounting. Nickel plated Cast-Zinc construction. Insertion .5dB Standard 7/16" hex nut center 3/4" overall length. Machined threads

HFS2150 Series Satellite Splitters - Professional grade high frequency satellite splitters provide low insertion loss, high isolation and return loss performance. Ideally suited for headends where satellite signals are split to multiple receivers. Advanced printed board circuitry ensures high-quality analog or digital signal transfer. Precision machined threads.

1GHz Ground Blocks - Single and dual path ground blocks. Used to provide CATV service drop grounding. Accepts AWG8wire. Weather resistant Zinc Alloy Die-Cast Housing. Anti-corrosive Chromate Coating. Machine threaded.

Brass Ground Clamps - Acorn-type Brass Ground Rod Clamps. Pressure bonds AWG10-14 ground wire to 4' and 8' ground rods. Corrosion resistant cast brass.

Belt Ground Straps - Adjustable easy-install pure copper grounding straps. Used in grounding of CATV, Satellite or Telephony service drops. Adjustable tension adjuster for secure attachment.

O-Span Clamp - Provides service drop attachment point at CATV and Telco strand. High strength machined aluminum jaw clamp. Anti-slip twist bolt design. Ideal for mid-span applications. Used with all common strand sizes.

A-10 P hook-3-3/4" P House Hook

A-22 Tap Bracket-12" Aluminum Tap Stand-Off Bracket

A-6 J hook-3-3/4 " J-Drive Hook

A-8A Bonding Clamp-Strand-Ground Brass Bonding Clamp
 

ST-1 - Security Sleeve Tool. The industry standard 7/16" socket ensures even connector pressure. Sure grip end and clip ring provide increased tightening leverage. Precision machined Nickel Plated Steel.

PICO-PRO-Signal Analysis Meter

Manual
 

LA-2150B- 16-20 dB Sloped 40-2150 MHz Satellite IF Inline Amp.  High performance SMD board circuitry. Precision machined F connector threads. Soldered back cover and nickel plated Zinc-alloy die cast housing.

LA-2150DSatellite IF Inline Amplifiers - Suited for DBS or MMDS applications. Available in 950-2150MHz for satellite only applications   High performance SMD board circuitry. Precision machined F connector threads. Soldered back cover and nickel plated Zinc-alloy die cast housing.

TA-12 UHF/VHF/FM distribution amplifier provides 12 db of gain, 2 full level outputs which reduce the need for additional splitter, very low noise and distortion.  It is suitable for small to large MATV-SMATV systems.

Manual

TA-15 UHF/VHF/FM distribution amplifier has an off-air channel range from 54-806mhz, 11-15 db of gain, and 4 db of sloped output.  This is suitable for small to large MATV-SMATV systems.

Manual

TA-25 UHF/VHF/FM distribution amplifier has 18-25 db of gain and the 7db sloped output across band provides low harmonic distortion.  It is suitable for small to large MATV-SMATV systems.

Manual

TA-36 UHF/VHF/FM distribution amplifier is a cost effective wide frequency bandwidth amplifier.  It has a 31-36db output and adjustable slope.  It is ideal for small to large MATV-SMATV systems.

Manual

TA-52 806mhz UHF/VHF/FM high gain launch amplifier provides a high 52 db gain output with extremely low noise and distortion.  Highly reliable and rugged design make this amplifier ideal for medium to large MATV systems. 

Manual

TSDM-2150 TV-satellite diplexer separates and isolates satellite (950-2150mhz) from UHF/VHF (54-806mhz) signals providing for clean insertion into satellite receivers.  Filters and mixes UHF/VHF and satellite signals into a single output allowing antenna and satellite signals on a single cable.

SUB-CATV sub-band and CATV bands separator-combiner.  Separates and isolates sub-band (5-48mhz) from CATV/UHF/VHF (54-10000mhz) signals providing for clean insertion into modulators and data translators.  filters and mixes sub-band and CATV/UHF/VHF signals to single output reducing reverse path ingress.

UVSJ uhf-vhf bands separator-combiner.  separates and isolates VHF (54-216mhz) from UHF high (470-809mhz) signals providing for clean insertion into headend strip amplifier.  Filters and mixes VHF and UHF signals allowing mixing of multiple antenna onto single cable.

Not all products are shown

Contact DFC for additional products and pricing (click here)

back to line card intro

back to home