Drop & Wiring Supplies

VSMA-601C  residential drop amplifier is a 1 port, bi-directional, 1 GHz amplifier. It puts out 15db of gain on the forward path.   Ideal for residential applications with existing installations.

VSMA-602C residential drop amplifier is a 2 port, bi-directional 1ghz amplifier.  It offers 12db forward gain.  It is ideal for applications in which you have a cable modem and regular TV.

VSMA-608C residential drop amplifier is a 8 port, bi-directional, 1ghz amplifier.  It puts out 4 db of forward gain.  It is perfect for situations where there are multiple TV's, VCR's, cable boxes or cable modems.

VSA-10/10-1000-2WZ(PI) 1 port, 1ghz, 10 db on incoming signal and return path for cable modems.  It is suitable for indoor or outdoor use and is easy to install.

VSMA101000D residential drop amplifier is a one way (forward only), 10 db, 1ghz amp.  It is also available in a 20db amp (VSMA201000).

VSPTREP-Multi-port Directional Couplers are available in 1, 2, 4, and 8 ports.  They are 1 GHz and come in various DB values. All have a ground screw, parallel in and out ports, and perpendicular tap ports. Housings are tin plated and solder sealed, producing a high degree of anti-corrosive protection. Precision machined "F" ports.

VSD2WSP is a high quality, digital, surge protected, 2 way splitter with a PC board design.  It support frequencies from 5-1000 MHz, is DC passing, and has 3.5db of insertions loss.  

VSD3WSP is a high quality, digital, surge protected, 3 way splitter with a PC board design.  It supports frequencies from 5-1000 MHz, is DC passing, 1 port has 3.5 db of insertion loss and 2 ports have 7 db of insertion loss.  It is also available in a balanced version that has equal insertion loss on all 3 ports.

VSD4WSP is a high quality, digital surge protected, 4 way splitter with a PC board design.  It supports frequencies from 5-1000 MHz, is DC passing and has 7 db of insertion loss on all 4 ports.

VSD6WSP is a high quality, digital, surge protected, 6 way splitter with a PC board design.  It supports frequencies from 5-1000 MHz, is DC passing and has 11.5 db of insertion loss on all ports.

VSD8WSP is a high quality, digital surge protected, 8 way splitter with a PC board design.  It supports frequencies from 5-1000 MHz, is DC passing and has 11 db of insertion loss on all 8 ports.

VSPREP-12 is a high quality, digital, surge protected, 12 way splitter with a PC board design.  It supports frequencies from 5-1000 MHz, is DC passing and has 12.5 db of insertion loss on all 12 ports.

VSPREP-16 is a high quality, digital, surge protected, 16 way splitter with a PC board design.  It supports frequencies from 5-1000 MHz, is DC passing and has 15 db of insertion loss on all 16 ports.

VSIS-EU Ground Isolator is used to eliminate the hum and horizontal bars caused when two or more devices are connected to a common ground through different paths.  The VSIS-EU allows cable signals above 100Hz to pass regardless of whether a ground differential exists between two connection points.

VSIEQ-DB-MHZ In Line Equalizers are available in 550 mhz or 860 mhz with db values of 6, 9 & 12.  The VSIEQ products come with a rubber seal on the male port to resist water intrusion and are usable indoors or outdoors over a wide temperature rnage and linear in performance.

TR75LTT terminator tool for the 3 prong lockinator.  It is made of chrome plated steel alloy for durability.  A 2 prong tool is also available to be ordered upon request.

VSOSC2F-(X)-(Y) dual frequency oscillator will provide two individual frequency outputs for balancing upstream paths in 2 way cable applications.  Output frequencies can be either individual or simultaneous.  This unit has an on/off switch and low battery indicator.  Output levels and frequencies between 5 and 65 MHz are per customer specification.  Due to the different needs for different customers this item is not stocked, please allow for a lead time.

Not all products are shown

Contact DFC for additional products and pricing (click here)

back to line card intro

back to home