|
OSP
|
|
 |
|
 |
The Fiber Optic Cable Puller from Condux
sets new standards for safe, accurate
pulling of fiber optic cables. Only the
Condux puller can offer load cell torque
input for the most accurate tension
measuring available. Unlike most hydraulic
measuring systems, this system is not
affected by changes in oil temperature,
component age and power source. That means
the Condux Fiber Optic Cable Puller does not
need to be recalibrated under different
weather conditions.
These pullers consist of a hydraulic motor,
variable-speed foot control, manual flow
control valve for adjusting maximum speed
and a manually adjustable pressure relief
valve for adjusting the ultimate pull
tension. |
 |
Condux duct rodders combine ease of
operation and reliable performance to help
increase the efficiency of your rodding
operations
Condux offers three types of duct rod:
Cobra®, Python®, and Mini-Cobra®. Each has a
glass reinforced composite core jacketed in
rugged plastic coating to ensure long life.
All three have excellent flexural strength,
compressive strength, fatigue resistance,
and memory. They also have favorable
electrical and thermal properties that make
them safe for use in cable-occupied duct.
They are suitable for pulling back winch
line or small diameter cable. |
|
 |
As a leader in the manufacture of cable
installation tools and equipment, Condux
offers a superior Fiber Optic Cable Blower
that is compact and lightweight, making it
ideally suited for your most difficult job
sites and “last mile” fiber installations.
An updated design has increased portability
and made operation easier than ever.
It's speed, control and versatility make it
efficient and easy to use.
|
 |
Condux PE &
PVC Pulling Eyes provide optimum gripping
power and a watertight design. The
watertight pulling eyes feature a multiple
o-ring configuration, an extremely rigid
center rod to prevent bending and a steel
tapered lead cone with the same OD as the
conduit. These design features protect the
outer leading edge of the conduit and form a
watertight seal. The Condux PE & PVC Pulling
Eyes also feature split gripping segments
with aggressive gripping threads coupled
with a steel expander plug that better grips
the full range of conduit ID’s |
|
 |
Condux Aerial Puller can pull
multiple cables easily and safely prior to
lashing. Cable attach to quick-connect
links and pulling eyes that swivel during
pulling to avoid tangles and 0possible cable
damage. A spring-loaded strand brake
holds the unit in place when pulling is
stopped and tension is reduce. The
brake releases when tension is increased and
pulling is resumed.. |
 |
Designed to pull
up to 4 new cables over existing bundles.
The Condux Overlash Aerial Cable Puller,
uses large high-impact plastic rollers that
roll easily and safely over existing bundles
of up to 2.75" (70 mm) in diameter. Cables
attach to quick-connect links and pulling
eyes that swivel during pulling to avoid
tangles and possible cable damage.
Replacement rollers available |
|
 |
Condux offers
economical cable blocks for support of one
or two cables or innerduct up to 1.25"
(32 mm) outside diameter. They can be used
on strands up to 3/8" (10 mm) in diameter.
Integrated cable retaining system with
spring-loaded arm. Frames are durable cast
aluminum with steel inserts on strand
contact surfaces. Rollers are plastic or
steel. |
 |
The 45 degree corner block mounts
on Pole Bracket with or without Pole Bracket
Mount Adapter, or with Set-Up Brackets,
depending on the application. Replacement
rollers are available |
|
 |
Essentially a
Set-Up Bracket with a chute built-in, it
creates a path from cable reel to strand.
Used in less demanding applications where
the reel and strand are aligned, eliminating
the need for a Set-Up Bracket and 45 Degree
Corner Block. The Condux Cable Chute, is
secured to the strand with a strand clamp,
safety clip, and tightening knob (all
included). The strand attachment assembly
swivels to ensure proper alignment with
cable reel. Chute surface is a
friction-reducing high-impact synthetic.
Accommodates cable up to 3.5" OD |
 |
Minimize strand
sagging during installation with the Strand
Brake. Designed to allow strand to move in
only one direction–the direction of the
pull. Convenient mounting bracket is secured
in a standard 3-bolt strand clamp on a pole.
Bracket swivels to allow slight offsets in
pole alignment. A Strand Brake is a simple
piece of safety equipment that can help
avoid major problems associated with strand
sagging. Available with ground wire clip
that attaches to the ground wire of the
first pole in series. Zinc-plated steel
construction. Recommended use: Every 4 to 6
poles and at every traffic crossing |
|
 |
Take a safe
approach to ground rod installation with
Ground Rod Drivers. One-person operation.
Rubber coated spring handles. Accommodates
ground rod up to 5/8" (16 mm) in diameter
and is available in two models.
NOTE: Do not
operate Ground Rod Drivers in areas where
underground cables are present. Properly
locate and mark adjacent utilities before
using this product. |
|
|
