|
Tools & Test Equipment
|
|
 |
|
 |
RTC 360 Radial Taper Compression Tool - Designed to
form a 360° environmentally resistant
taper crimp. High quality stainless steel. Produces a water-tight seal
and reduces radiation leakage. |
 |
CPLCCT-SLM Linear Compliant Compression
Tool SLM - For use with BNC, RCA, IEC, right angle wall plate,
commercial and gold F-type connectors. |
|
 |
CPLCRTC-1-Radial Taper compression Tool. this
compression tool works with the F- Conn line of F and RCA connectors. |
 |
PS Series Cable Pro Strippers - PS59/6
preps 59 and 6 series drop wire while the PS11 preps 7 and 11 series
cable. Cartridges are preset from the factory, but blades may be
adjusted to different prep lengths on the 5/96 cartridge. |
|
 |
TWS716 Super Trap Wrench - fits all 7/16" hex
fittings and all standard traps. The hex head is made of anodized
black hardened steel for longer life and easy identification. This
tool is recommended for heavy use. |
 |
TWC716 Combo Trap Wrench- combines the
TW716 trap wrench with a security sleeve tool. Fits all standard
size traps and security sleeves. Security socket is made of
hardened steel for longer life. anodized blue for easy
identification. |
|
 |
CNW6- Can Wrench combines 3/8" and 7/16" sockets.
Used to open pedestals and tighten ground straps and taps. Other
sizes can be ordered. |
 |
SWU716-Universal Security Wrench fits all
sizes of security sleeves. Tightens to 40 inch pounds. Can
be used with all "F" and "CF" type terminators. |
|
 |
532HEX -Telephone Nid Tool has a 5/32" hex end to
open telephone pedestals and boxes. Made of long lasting, high
carbon steel. |
 |
GTT-4/GTT-7-Gilbert Terminating Tools
features solid spring steel ears. Comes in 4" and 7" versions that
are both durable and easy to use. Use with Gilbert terminators. |
|
 |
CPPT-1-Pen Toner clips to shirt pocket for easy
access. the right angle male push-on connector makes it easy to
work in tight spaces. The female push-on connector allow for
faster toning. Loud audio tone identifies line carry signal.
Battery is included. |
 |
FIT-6- Flaring & Insertion Tool eases the
insertion of Series 59,6 & 11 connectors in cold weather and on plenum
cable. Made with a heat treated steel with black oxide finish.
The insertion side threads are machined and buffed. The flaring
side has a precision ground flaring edge. |
|
 |
CC2016-Cable Caddy holds one 20"x16" reel. Is
made of sturdy 3/4" tubing and can be folded up for easy storage. |
|
|
|
Not all products are shown
Contact DFC for additional products and pricing (click
here)
back to line card intro
back to home |
