AFL Telecommunications-LL-400s Optical Splicing and Distribution Enclosure |
 |
 |
|
| Description: |
The LightLink™ LL-400s optical splicing and distribution enclosure provides organizing, splicing and interconnecting fibers in FTTx, broadband, distribution and building entrance applications. The UL listed, LL-400s is a butt-style enclosure with four seperate cable entry/exit grommets. the unit supports a maximum storage and splicing capacity or up to 72 single or 144 mass-fussed fibers.
Spec Sheet |
|
 |
|
|
|
|
|
|
Emerson-TV40 and TV60LP pedestal |
|
 |
|
| Description: |
TV40 and TV60LP classic CATV pedestals are space-optimized housings that protect CATV distribution equipment. Pedestals are made of heavy gauge mill-galvanized steel and treated with a unique finishing process for longer life. The CATV pedestals are self-supporting, although these may be stake-mounted for additional stability.
Spec Sheet |
|
|
|
|
|
|
Emerson-TV80, TV80SB, and TV80WM pedestal |
|
 |
|
| Description: |
TV80 Series CATV pedestals are aboveground, space-optimized housings that protect CATV distribution equipment. Pedestals are made of heavy gauge mill-galvanized steel and treated with a unique finishing process for longer life. The CATV pedestals are self-supporting, although these may be stake-mounted for additional stability.
Spec Sheet |
|
|
|
|
|
|
Emerson-TV1016 & TV1024 pedestal |
|
 |
|
| Description: |
TV1016 & TV1024 Closures-Above ground pedestals provide maximum capacity and work area to install and maintain CATV distribution equipment including amplifiers, splitters, taps, couplers, and line extenders. Housing components include cap, front and back hinged doors with locks, base, and base/column assembly. Internal components include two cross-slot mounting plates. Two 32" stakes are also provided. Hinged swing-open removable front and rear doors provide 360° accessibility.
Spec Sheet |
|
|
|
|
|
|
Emerson-TV104 & TV106 Pedestal |
|
 |
|
| Description: |
TV104 & TV106 pedestals are round cornered square-design housings that provide maximum capacity and work area to install and maintain CATV distribution equipment. Heavy gauge mill-galvanized steel, with a unique finishing process for longer life. Components include; back-plate/lower front cover assembly and upper front cover/cap assembly with hand pocket. Upper cover is removable for efficient equipment installation. Pedestals are self-supporting or may be stake mounted for additional stability.
Spec Sheet |
|
|
|
|
|
|
Emerson-TV2400 & TV2500 pedestal |
|
 |
|
| Description: |
TV2400 & TV2500 closures-above-ground pedestals for distribution, line support and power CATV Equipment including amplifiers, line extenders, couplers, splitters and taps. Louvers with Mylar Screen provide cross-ventilation to cool internal equipment. Self-locking stainless-steel latches on the front and back have padlock hasps to offer several security options. Front and rear door are removable to provide 360° accessibility. Closed -cell weather stripping lines all door edges for weatherproof protection. Two cross-slot mounting plates provide internal mounting versatility.
Spec Sheet |
|
|
|
|
|
|
Emerson-TV1228 pedestal |
|
 |
|
| Description: |
TV1228 metallic pedestal are versatile above ground low profile 360° access closures provide maximum capacity and work area for multiple applications. Designed primarily to house amplifiers and line extenders, but can accommodate distribution equipment including taps, splitters, and couplers. Louvers on both sides of the closure allow flow-through ventilation for heat dissipation. Low-profile design saves space and increases site aesthetics while large internal capacity allows efficient installation of amplifiers and other CATV hardware. Manufactured of heavy gauge mill-galvanized steel, treated with a unique finishing process for longer life.
Spec Sheet |
|
|
|
|
|
|
Emerson-BD Series Distribution Closures |
|
 |
|
| Description: |
UPCBD3, 4, 5 telephone distribution closures are round cornered, square design which are accepted for use by the RUS. Rugged metal housing made of mill-galvanized steel for durability and low maintenance costs. Tongue-in-groove fit of upper cover provides better protection against environmental conditions. Accommodates buried wires, cables, terminal blocks and load coil assemblies. Three convenient sizes.
Spec Sheet |
|
|
|
|
|
|
Emerson-CCP1016 Pedestal |
|
 |
|
| Description: |
CCP1016 Combination Connection Pedestals are aboveground housings for various distribution equipment such as taps, couplers, splitters, and splice cases. Combination Connection Pedestals are made of heavy gauge mill-galvanized steel and treated with a unique finishing process for longer life. The pedestals contain two compartments for multiple distribution facilities.
Spec Sheet |
|
|
|
|
|
|
|
Multilink-14002-2 OTN Cabinet |
|
 |
|
| Description: |
14002-2 OTN Cabinet with battery tray is a 2 bay unit the features an 8000 BTU a/c unit to control the temperature inside. The integrated battery tray allows for storage of of battery power under the cabinet. It is 100% enviromentally sealed with a 3 point latch on each door for security. It features 19"-23" adjustable rack width.
Spec Sheet |
|
|
|
|
|
|
Multilink-030-120-10 Mini OTN |
|
 |
|
| Description: |
030-120-10 Mini OTN is an above ground application to shelter environmentally sensitive equipment form rain, sleet, snow, dust, driving wind, hail, corrosion and vandalism. It comes with a 6000 BTU a/c unit with an integrated heater to control the inside temperature of the unit. The main body is 1/8" Marine Grade Aluminum with a Polyester Powder Coat Finish. Hardware is Type 304 Stainless steel. Door is equipped with a 3 point latch for maximum security.
Spec Sheet |
|
|
|
|
|
|
Multilink-030-180-10 Backhaul Rack Enclosure |
|
 |
|
| Description: |
030-180-10 10RU Backhaul Rack Enclosure is engineered to house 10 full useable rack units of 19" rack mounted equipment. It is designed to protect the equipment from the various outside enviroment conditions. The standard version is offered with wall/pole mounting bracket, a demarcation window and insulation. It offers excellent security features such as; a padlockable 3 point latch system, door alarm switch and stainless steel piano hinge.
Spec Sheet |
|
|
|
|
|
|
Multilink-2000-FNC Pedestal |
|
 |
|
| Description: |
2000-FNC above ground pedestal shelters amplifiers, splice enclosrures and nodes while providing ample space for slack storage in a secure enviroment. The cabinet includes two mounting rods and slack storage brackets.
Spec Sheet |
|
|
|
|
|
|
Pencell-AGLPNS-123018 Pedestal |
|
 |
|
| Description: |
AGLPNS-123018 Above Grade Pedestal meets the requirements of Electrice, CATV, Telephone and Communications Service. The base is of high-density polyethylene structural foam and the pedestal is made of low-density polyethylene rotomolding. It offers excellecnt environmental resistance. The part number and price will vary depending upon the color, lock, venting and mounting bracket options that are required.
Spec Sheet |
|
|
|
|
|
|
Pencell-AGLPNS-183218 Pedestal |
|
 |
|
| Description: |
AGLPNS-183218 Above Grade Pedestal meets the requirements of Electrice, CATV, Telephone and Communications Service. The base is of high-density polyethylene structural foam and the pedestal is made of low-density polyethylene rotomolding. It offers excellecnt environmental resistance. The part number and price will vary depending upon the color, lock, venting and mounting bracket options that are required.
Spec Sheet |
|
|
|
|
|
|
Pencell-AGVNS-1010-20 Pedestal |
|
 |
|
| Description: |
AGVNS-1010-20 Above Grade Pedestal meets the requirements of Electrice, CATV, Telephone and Communications Service. The base is of high-density polyethylene structural foam and the pedestal is made of low-density polyethylene rotomolding. It offers excellecnt environmental resistance. The part number and price will vary depending upon the color, lock, venting and mounting bracket options that are required.
Spec Sheet |
|
|
|
|
|
|
Pencell-AGVNS-1212-30 Pedestal |
|
 |
|
| Description: |
AGVNS-1212-30 Above Grade Pedestal meets the requirements of Electrice, CATV, Telephone and Communications Service. The base is of high-density polyethylene structural foam and the pedestal is made of low-density polyethylene rotomolding. It offers excellecnt environmental resistance. The part number and price will vary depending upon the color, lock, venting and mounting bracket options that are required.
Spec Sheet |
|
|
|
|
|
