|
AFL Telecommunications-Fiber Receiver Service Cables |
 |
 |
|
| Description: |
AFL’s LightLink Fiber Receiver Service (Node Service) cable assemblies are factory tested to meet stringent installation performance demands. These assemblies make splicing from an optical node to a closure fast, easy and reliable. This connection is critical to the installation and requires an environmental seal between the cable and the node housing. AFL’s assembly comes with this node fitting pre-installed on the cable, featuring an anti-twist design enabling easy mounting without twisting the cable. The mounting thread is an industry standard size of 5/8-24 UNEF.
Spec Sheet |
|
 |
|
|
|
|
AFL Telecommunications-LL-400b Optical Splicing and Distribution Enclosure |
|
 |
|
| Description: |
The LightLink™ LL-400b fiber optic splicing and distribution enclosure provides for organizing, splicing, and interconnecting fibers in FTTx, broadband, distribution, and building entrance applications. The LL-400b is a butt-style enclosure equipped with six independent cable entry/exit grommets. The unit supports a maximum storage and splicing capability of 240 single or 288 mass-fused fibers.
Spec Sheet |
|
|
|
|
|
|
Canusa-CFSP-12-61 Fusion Splice Sleeve |
|
 |
|
| Description: |
CFSP-12-61 Fusion Splice Sleeve Protects fiber optic splices from mechanical and environmental effects. The unique design of the CFSP has only one entry point for the fiber and misthreading into the backbone can not occur. The CFSP also offers a longer liner and a beveled stainless steel reinforcing rod which eliminates the risk of fiber damage during installation. Clear sleeve design permits easy centering of splice before heating. The CFRP Splice Sleeve for ribbon fiber is also available.
Spec Sheet |
|
|
|
|
|
|
AFL Telecommunications-LL-400s Optical Splicing and Distribution Enclosure |
|
 |
|
| Description: |
The LightLink™ LL-400s optical splicing and distribution enclosure provides organizing, splicing and interconnecting fibers in FTTx, broadband, distribution and building entrance applications. The UL listed, LL-400s is a butt-style enclosure with four seperate cable entry/exit grommets. the unit supports a maximum storage and splicing capacity or up to 72 single or 144 mass-fussed fibers.
Spec Sheet |
|
|
|
|
|
|
|
|
AFL Telecommunications-LG-55 Fiber Optic Splice Closure |
|
 |
|
| Description: |
LG-55 Sealed Fiber Optic Splice Closure offers many solutions including repair and distribution splicing, grounging for Fiber-in-the-Lopp applications and for use as an isolation gap with armored cables. The LG-55 accepts stranded loose tube or Uniflex cables in armored or dielectric configurations. Use the LL-2425 splice tray with this closure.
Spec Sheet |
|
|
|
|
|
|
|
|
|
Multilink-1120-F Splice Enclosure |
|
 |
|
| Description: |
1120-F MiniButt Fiber Optic Splice Enclosure is designed for low count fiber splicing in areas where space is limited. The enclosure incorporates an integrated gasket to prevent the ingress of water but allows for easy access. This RUS approved, unit can support up to 2 1120-SSTA splice trays for a total of 24 fusion splices.
Spec Sheet |
|
|
|
|
|
|
Multilink-4000-D Splice Enclosure |
|
 |
|
| Description: |
4000-D Starfighter Fiber Optic Splice Enclosure is an all parts inclusive hermetically sealed splice enclosure designed for ease of assembly and re-entry. The Starfighter has a gasketed split end plate for midaccess cable applications and includes an integrated slack storage basket, interlocking splice trays and an easy to install sealing system. It is a RUS listed, medium capacity enclosure that can be used in aerial, pedestal and underfround applications.
Spec Sheet |
|
|
|
|
|
|
Multilink-4048-D Splice Enclosure |
|
 |
|
| Description: |
4048-D or 10-8365 Fiber Optic Dome Splice Enclosure is an all parts inclusive hermetically sealed splice enclosure designed for ease of assembly and re-entry. The Starfighter has a gasketed split end plate for midaccess cable applications and includes an integrated slack storage basket, interlocking splice trays and an easy to install sealing system. It is a RUS listed, medium capacity enclosure that can be used in aerial, pedestal and underfround applications.
Spec Sheet |
|
|
|
|
|
|
|
Multilink-70902K Splice Tray |
|
 |
|
| Description: |
70902K 1120-SSTA Optical Fiber Splice Tray is designed to safely route and store optical fiber splices. It has a 12 single fusion splice capacity or 8 mechanical splice capacity. The 1120 series splice tray is designed to be installed in the Multilink FDU or 1120-F series Optical Splice Closure.
Spec Sheet |
|
|
|
|
|
|
|
Multilink-10-8007 Splice Tray |
|
 |
|
| Description: |
10-8007 Starfighter 4048-SSTP Optical Fiber Splice Tray is designed to route and store optical fiber splices. The tray is equipped with a full set of organizers to support single and mass fusion splicing. It is capable of holding 16 mechanical splices or 24 single fusion splices. It is designed to be installed into the Starfighter 4048-D, 4000-D splice closures and fiber rack mounted FDU's.
Spec Sheet |
|
|
|
|
|
|
Multilink-71244K Sno-Shoe |
|
 |
|
| Description: |
71244K Sno-Shoe Eliminates the need for slack storage vaults and protects the minimum bend radius of fiber. Nonconductive and will not harm fibers. Stackable to accommodate additional fiber mount tiering. 20 year warranty. Various sizes and part numbers are available.
Spec Sheet |
|
|
|
|
|
|
Tyco-FOSC 400 A4 Splice Enclosure |
|
 |
|
| Description: |
FOSC 400 A4 Fiber Optic Splice Closure are a proven piece of fiber management hardware that features a highly reliable sealing system. The base-to-dome seals on FOSC 400 closures are mechanical for ease of installation and re-entry. They have four round ports, an oval port for mid span installation and can be used in above or below ground applications.
Spec Sheet
Installation Guide |
|
|
|
|
|
