Multilink-4000-D Splice Enclosure |
 |
 |
|
| Description: |
4000-D Starfighter Fiber Optic Splice Enclosure is an all parts inclusive hermetically sealed splice enclosure designed for ease of assembly and re-entry. The Starfighter has a gasketed split end plate for midaccess cable applications and includes an integrated slack storage basket, interlocking splice trays and an easy to install sealing system. It is a RUS listed, medium capacity enclosure that can be used in aerial, pedestal and underfround applications.
Spec Sheet |
|
 |
|
|
|
|
Multilink-4048-D Splice Enclosure |
|
 |
|
| Description: |
4048-D or 10-8365 Fiber Optic Dome Splice Enclosure is an all parts inclusive hermetically sealed splice enclosure designed for ease of assembly and re-entry. The Starfighter has a gasketed split end plate for midaccess cable applications and includes an integrated slack storage basket, interlocking splice trays and an easy to install sealing system. It is a RUS listed, medium capacity enclosure that can be used in aerial, pedestal and underfround applications.
Spec Sheet |
|
|
|
|
|
|
|
Multilink-70902K Splice Tray |
|
 |
|
| Description: |
70902K 1120-SSTA Optical Fiber Splice Tray is designed to safely route and store optical fiber splices. It has a 12 single fusion splice capacity or 8 mechanical splice capacity. The 1120 series splice tray is designed to be installed in the Multilink FDU or 1120-F series Optical Splice Closure.
Spec Sheet |
|
|
|
|
|
|
|
Multilink-802-008-10 Cabinet Pad |
|
 |
|
| Description: |
802-008-10-MQ-FRM cast poly pad is a pre cast concrete polymer-carbonite pad with inserts for mounting the MQ enclosures. It has a 13" x 10" opening in the center to allow cable entrance to the enclosure from below.
Spec Sheet |
|
|
|
|
|
|
|
|
Multilink-BBM-48E Battery Balance Manager |
|
 |
|
| Description: |
BBM-48E-48 volt Battery Balancer automatically tracks charger voltage and temperature compensation. Battery string charges at full charger current. Evenly distributes charge across all batteries in the string. Can be used with any manufacturer's CATV supply and balances the batteries in any three or four battery power supply. Prevents over discharge damage. |
|
|
|
|
|
|
Multilink-PM3/4-NE Pole Mount Enclosures |
|
 |
|
| Description: |
PM3/4-NE-Designed to house broadband power supplies and batteries. Durable all-aluminum construction with light equipment gray powder paint. totally enclosed offering highest security for tampering. Battery slide trays lock in open and closed positions. Front door is hinged and is removable for ease of installation and service. Door lock included with high-security latches. |
|
|
|
|
|
|
|
|
Pico Macom-A-6 J Hook |
|
 |
|
| Description: |
A-6-J Hook is used for tying off support messenger of RG 6 messengered cable. It provides a CATV service drop attachment point on utility poles.
Spec Sheet |
|
|
|
|
|
|
|
|
|
|
|
Powertronics-OM-115/60-25 Omega Series Power Supplies |
|
 |
|
| Description: |
OM-115/60-25-Omega Series Power Supply are robust, affordable non-standby power supplies. 60V or 60/90 field-selectable output. Stainless steel components. Output current flexibility. Modular construction and sturdy galvanized steel cabinets. Power "on" indicator is visible from the ground. Ferroresonant module operates at better than 92% efficiency. The modular design makes service and maintenance easy, especially when transformer and I/O modules require change quickly in the field. Upgrading is as simple as swapping transformer units. Various other models and configurations are available. Call us to find one that will fit your application.
Spec Sheet |
|
|
|
|
|
|
R5058 Wirevise |
|
 |
|
| Description: |
R5058-Wirevise is used to support both ends of self support solid steel messenger drop cable that is integrated into the jacket in a figure 8 configuration. It can be used on cable sizes within the range of .091" to .114". |
|
|
|
|
|
