AFL Telecommunications-Fiber Receiver Service Cables |
 |
 |
|
| Description: |
AFL’s LightLink Fiber Receiver Service (Node Service) cable assemblies are factory tested to meet stringent installation performance demands. These assemblies make splicing from an optical node to a closure fast, easy and reliable. This connection is critical to the installation and requires an environmental seal between the cable and the node housing. AFL’s assembly comes with this node fitting pre-installed on the cable, featuring an anti-twist design enabling easy mounting without twisting the cable. The mounting thread is an industry standard size of 5/8-24 UNEF.
Spec Sheet |
|
 |
|
|
|
|
AFL Telecommunications-OPN-1224 LightLink™ OptiNID |
|
 |
|
| Description: |
The OPN-1224 in an optical demarcation closure designed for use in either indoor or outdoor environments. It is capable of housing up to 24 bulkhead adapters in two 118 LGX® compatible adapter plates and comes equipped with a splice tray (LL-2425), which holds up to 24 single fusion splices. The OPN-1224 can be either wall or pole mounted.
Spec Sheet
|
|
|
|
|
|
|
Fiber Fab-Jumpers and Pigtails |
|
 |
|
| Description: |
Can be made to any specification you desire. Multimode/Singlemode, SC, FC, LC, ST, E2000 or MU connectors with ultra or angled polish. |
|
|
|
|
|
|
|
Multilink-10-2146-OW Termination and Splice Shelf |
|
 |
|
| Description: |
The 10-246-OW (model: FRM-4RU-4X-PS) is a 4RU combination 19” or 23” rack mounted termination and splice shelf. The unit has a 4 position termination panel in an upper slide out shelf with a lower compartment with a 4 splice tray slide out shelf. This allows for a fully front access application. Blank panels are available to fill unused panel positions. The FRM-4RU-4X-PS is one of a family of units that support fiber termination in rack mount applications. Off White, Aluminum.
Spec Sheet |
|
|
|
|
|
|
Multilink-10-4323 Termination and Splice Shelf |
|
 |
|
| Description: |
The 10-4323 (model: FRM-1RU-2X-SO) is a 1RU, 19” or 23” rack mount fiber distribution shelf designed to support both patching and splicing in one unit. It holds two Multilink termination panels and has a swing out master panel that allows for accessing terminations and splicing. Included are two universal 19” or 23” mounting supports. The unit requires an 1120- SSTA splice tray (ordered separately). Black.
For Off-White part number is: 10-4325-OW
Spec Sheet |
|
|
|
|
|
|
Multilink-10-4533 Termination and Splice Shelf |
|
 |
|
| Description: |
The 10-4533 (model: FRM-2RU-4X-TS) is a 2RU, 19” or 23” rack mount fiber distribution shelf designed to support both patching and splicing in one unit. It holds four Multilink termination panels and has a slide out master panel that allows for accessing terminations or for splicing if used as patch/patch splice housing.
Spec Sheet |
|
|
|
|
|
|
|
Multilink-70902K Splice Tray |
|
 |
|
| Description: |
70902K 1120-SSTA Optical Fiber Splice Tray is designed to safely route and store optical fiber splices. It has a 12 single fusion splice capacity or 8 mechanical splice capacity. The 1120 series splice tray is designed to be installed in the Multilink FDU or 1120-F series Optical Splice Closure.
Spec Sheet |
|
|
|
|
|
|
OCS-Jumpers and Pigtails |
|
 |
|
| Description: |
Reliable, flexible connectivity options. Available in any length with any connecton option. |
|
|
|
|
|
|
|
AFL Telecommunications-LL-400b Optical Splicing and Distribution Enclosure |
|
 |
|
| Description: |
The LightLink™ LL-400b fiber optic splicing and distribution enclosure provides for organizing, splicing, and interconnecting fibers in FTTx, broadband, distribution, and building entrance applications. The LL-400b is a butt-style enclosure equipped with six independent cable entry/exit grommets. The unit supports a maximum storage and splicing capability of 240 single or 288 mass-fused fibers.
Spec Sheet |
|
|
|
|
|
|
AFL Telecommunications-CON2UP Termination Patch/Splice Panel |
|
 |
|
| Description: |
The LightLink™ LANSystem™ CON2UP is a 2RU Fiber Termination Patch/Splice Panel designed for use as a rack mount interconnect point where termination and connectivity of up to 72 fibers is desired. The panel design is based on a 2 rack unit height and is provisioned with six LGX 118 compatible mounting positions that can accommodate adapter plates, XFM optical cassettes, passive optical modules or any combination therein.
Spec Sheet |
|
|
|
|
|
|
|
AFL Telecommunications |
|
 |
|
| Description: |
Used to mate industry standard connectors, adapters are available with metal and ceramic alignment sleeves, and are color coded for easy identification. Available in SC, FC, ST, LC, MU, MT-RJ, MTP & Hybrid |
|
|
|
|
|
|
Fiber Fab-Adapters |
|
 |
|
| Description: |
Optical adapters are designed to mate two connectors together, usually mounted in a patch panel or wall panel box.
Spec Sheet |
|
|
|
|
|
|
|
AFL Telecommunications-Buildout attenuators |
|
 |
|
| Description: |
Provide superior performance for all singlemode in-line attenuation requirements. Standard attenuation values are 5, 10, 15, and 20dB, available in SC, FC, ST, and LC connector styles. |
|
|
|
|
|
|
Fiber Fab-Single mode attenuators |
|
 |
|
| Description: |
Available in FC, SC, LC & MU styles with PC orAPC finish. These high performance attenuators are designed to give accurate attenuation over a wide range of wavelengths. The plug type configuration allows you to use directly on the ends of the fiber jumpers and to insert directly in to the adapter.
Spec Sheet |
|
|
|
|
|
|
